• ASTM D892 - 18 Standard Test Method for Foaming Character...

    1.1 This test method covers the determination of the foaming characteristics of lubricating oils at 24 °C and 93.5 °C. Means of empirically rating the foamin...

    www.astm.org/Standards/D892.htm

  • Online Courses by Plastics Formulation Experts

    Formulate water-based printing inks that equal solvent-borne inks performance and avoid issues like slow drying, foaming tendency, poor press stability. Tere...

    polymer-additives.specialc...

  • Breitlaender

    foaming tendency) are more and more replaced by granular type of fluxes, either as a special sieving of broken grains with a certain part of fine particles...

    www.breitlander.com/en/?M=040404

  • ASTM G170 - 06(2020)e1 Standard Guide for Evaluating and Q...

    several other key performance factors need to be evaluated: (1) water/oil partitioning, (2) solubility, (3) emulsification tendency, (4) foaming tendency, (5) ther...

    www.astm.org/Standards/G170.htm

  • Effect of Substrate and Intermediate Composition on Foaming...

    POME and POME under AD. The results showed increased concentration of substrate and intermediate compounds in waster could create more foaming ten...

    www.sciencedirect.com/science/article/pii/S1876...

  • SELTEC - Our expertise is our strength

    low foaming tendency, rapid water separation and consequently reduction of water and oil sludge. PLANTOFLUX-AT-S are nontoxic, biodegradable over 90% ...

    www.seltecuae.com/plantoflux-at-s/

  • Diofan® 193 D Solvay Specialty

    Surface Tension - Foaming tendency lbf/in Viscosity (68°F) mPa·s Mechanical Nominal Value Unit Test Method Coefficient of Friction - vs. Aluminum - D...

    plastics.ulprospector.com/datasheet/e284899/dio...

  • Apar Industries Limited (Unit - Oil) - Manufacturer from Mumbai...

    we provide these lubricants in superior quality packaging material to avoid leakage and purity. Acknowledged for low foaming tendency, good air release prop...

    www.indiamart.com/apar-chemat...

  • Effect of MDEA degradation products on foaming behavior and ...

    foaming study was combined with physical characterization of the tested solution to enhance the understanding of the foaming behavior. The foaming te...

    www.sciencedirect.com/science/article/pii/S1750...

  • IRGACOR L190 Plus BASF Replacer Purity 50%,China

    Offers an extremely low foaming tendency and an excellent air release - Good biodegradability - Compatible with hard water - Fsail 3190 may be used for co...

    www.guidechem.com/trade/pdetail3510918.html

12345678910下一页找到相关结果约143个