• Superior high tensile elongation of a single-crystal CoCrFeNiAl...

    tensile elongation of about 80% is achieved in the single-crystal alloy, accompanied by a large work-hardening exponent and a shear-fracture mode. A ...

    www.sciencedirect.com/science/article/pii/S0966...

  • Post-uniform elongation and tensile fracture mechanisms of Fe...

    post-uniform elongation (epu), strain rate sensitivity (SRS), fracture mechanism and Al concentration in Fe-18Mn-0.6C-xAl twinning-induced plasticity steels. ...

    www.sciencedirect.com/science/article/pii/S1359...

  • ...Performance of PVC-Coated Membrane Material under Differ...

    the tensile strength retention decreased by10.63% but the tensile elongation retention just decreased by 8.89%.The surface of PVC coating can be clearly ob...

    en.cnki.com.cn/Article_en/CJFDTO...

  • Commercial Carbon Fiber | ZOLTEK

    Tensile Elongation at Break 2.0% 2.0% 1.9% 1.9% Flexural Strength 372 MPa 53.95 ksi 372 MPa 53.95 ksi Flexural Modulus 19.6 GPa 2.89 msi 20 ...

    zoltek.com/products/px35/

  • ASTM D6637 / D6637M - 15 Standard Test Method for Determi...

    5.1 The determination of the tensile force-elongation values of geogrids provides index property values. This test method shall be used for quality control and a...

    www.astm.org/Standards/D6637.htm

  • Pipe & Buoy

    Combination of strength and flexibility ( 250% tensile elongation) means concrete bases are not required on wetlands and difficult terrain High strength and fle...

    www.pipeandbuoy.com.au/uhmwpe-pipes.php

  • Pkg Knowledgebase

    Tensile Elongation (%) D882 MD 440 CD 575 Elmendorf Tear (GM) D1922 MD 250 CD 500 Corner protection Corner protection, please see the illus...

    www.pkgsolutions.co.uk/kb/Unitization_and_Stac...

  • ...- 05(2019) Standard Test Method for Breaking Strength and ...

    1.1 This test method covers the measurement of tensile strength at break (breaking strength) and stretch properties (elongation) for pressure-sensitive tapes ...

    www.astm.org/Standards/D3759.htm

  • ASTM D5034 - 21 Standard Test Method for Breaking Strength...

    D5034-21 Standard Test Method for Breaking Strength and Elongation of Textile Fabric... 5.5 Comparison of results from tensile testing machines operating o...

    www.astm.org/Standards/D5034.htm

  • ALFA POLIMER

    (Tensile Elongation At Yield), akma sınırındaki gerilme direnci (Tensile Strength At Yield), kopmadaki çekme direnci (Tensile Strength At Break), kopm...

    www.alfaplastik.com.tr

上一页12345678910下一页